| Step | | Procedure & Parts & Tools |
| 1 |
|
PULL DOWN ON THE HANDLE RELEASE LEVER AND LIFT UP ON HANDLE TO REMOVE IT.
|
| 2 |
|
DISCONNECT THE WHITE POWER PLUG FOR NOW. REMOVE THE 6 SCREWS IN BACK OF HANDLE.
| Screwdriver-phillips |
|
|
| 3 |
|
LIFT UP ON THE BACK OF HANDLE TO SEPARATE FROM THE FRONT OF HANDLE.
|
| 4 |
|
LOCATE THE VACUUM SWITCH (THIS IS THE RED SWITCH). PULL THE RED WIRE CONNECTOR AND THE BLACK WIRE CONNECTORS TO DISCONNECT THE WIRES.
|
| 5 |
|
RECONNECT THE WHITE POWER PLUG FROM STEP 2. PLUG THE MACHINE IN. SET THE VOLT METER TO VOLTAGE. INSERT THE VOLT METER LEADS INTO THE RED AND BLACK WIRE CONNECTORS.(DOES NOT MATTER WHICH ONE GOES WHERE).PLUG THE MACHINE IN. ACTIVATE THE MACHINE. THE VOLT METER SHOULD READ APPROX. 120 VOLTS. REVERSE STEPS 1 THRU 4 TO REASSEMBLE MACHINE.
| Volt meter (True RMS capable) |
&Width=100)
|
|